The 3105 H18 aluminum coil belongs to the aluminum-manganese-magnesium (Al-Mn-Mg) series of rust-resistant alloys. Processed via full cold-working to an H18 (fully hard) temper, it provides superior strength and rigidity among 3xxx-series aluminum alloys, while retaining the inherent weather and corrosion resistance characteristic of Al-Mn alloys. Aluminum coil 3105 h18 is widely used in applications requiring high structural rigidity—such as profiled architectural roofing, high-speed bottle cap stamping, industrial enclosures, shutters, gutters and louvers. 3105 aluminum coil serves as a mainstream industrial aluminum coil choice that balances cost-effectiveness with structural performance, manufactured in compliance with international standards including ASTM B209 and EN 485.

In terms of alloy composition, 3105 aluminum utilizes manganese and magnesium as its primary strengthening elements. Their proportions are strictly controlled within standard ranges: 0.30%–0.80% manganese, 0.20%–0.80% magnesium, ≤0.60% silicon, and ≤0.70% iron, with the remainder consisting of an aluminum matrix. Manganese enhances the alloy's corrosion resistance and processing stability, while magnesium further strengthens the matrix. This combination allows the material to perform reliably over the long term in atmospheric, rainy, or mildly corrosive environments; it is suitable for both indoor and general outdoor use without the need for additional protective coatings.
The H18 temper denotes a fully work-hardened state, representing the highest strength level among the standard supply tempers for 3105 aluminum coils. The mechanical properties are stable and consistent: the tensile strength is ≥195 MPa (typically controlled between 205–260 MPa in standard production), and the yield strength is ≥180 MPa. Elongation varies slightly with thickness, ranging from ≥1% to 3% for standard thicknesses of 0.3–1.2 mm. Compared to 3003 H14 aluminum coils of the same thickness, 3105 H18 aluminum coil offers a yield strength increase of over 40%, providing superior surface rigidity, enhanced resistance to denting, and greater tolerance for wind loads—making it ideal for applications involving flat surfaces or minor bending.
Available specifications cover mainstream industrial requirements: thicknesses range from 0.20 mm to 3.00 mm, and widths can be customized from 20 mm to 2,600 mm. Coil inner diameters are available in four standard sizes—150 mm, 300 mm, 405 mm, and 508 mm—with coil weights optimized to suit the client’s decoiling equipment and container loading requirements. Thickness tolerances are strictly controlled within ±0.02 mm, width tolerances are ≤±0.5 mm, and surface flatness is ≤0.5 mm/m, ensuring compatibility with high-speed automated stamping and roll-forming production lines. The standard factory finish is a mill-finish surface, which can be further processed with PE or PVDF coatings or lamination to meet specific aesthetic and weather-resistance requirements for various end-use applications.
In practical use, the core value of 3105 H18 aluminum coils lies in two primary areas.
In construction and roofing, when roll-formed into corrugated sheets or standing-seam roof panels, the material’s high rigidity reduces the risk of deformation during high-wind events; this makes it an excellent choice for projects in wind-prone regions—such as North America or the Middle East—as it helps minimize the need for ongoing maintenance.
In the packaging and closure sector, the high rigidity of this "full-hard" temper is well-suited for high-speed stamping lines producing ROPP (roll-on pilfer-proof) caps and crown caps. It ensures consistent roundness and a low rate of cracking during the flanging process; when combined with food-grade coatings, it can be used directly for sealing beverage and liquor containers.
As a specialized manufacturer of 3105 H18 aluminum coils, Haomei Aluminum operates a comprehensive production line encompassing hot rolling, cold rolling, annealing, and slitting. Each batch is supplied with full material certification, ensuring traceability back to the specific furnace heat number and performance test data. We offer both wholesale supply of standard coils and custom production for specific requirements, with reliable delivery timelines and a well-established process for FOB port shipments. Clients with procurement needs are invited to provide details—including thickness, width, alloy temper, and order volume—to receive an accurate quotation and access our sample testing services.
live:onlinehcx